Shindaiwa BCK-11 Manual do Operador

SHINDAIWA GRASS TRIMMER TO BRUSHCUTTER CONVERSION KIT FOR T282 GRASS TRIMMERWARNING!Minimize the risk of injury to yourself and others! Read the Owner

10Shoulder Strap NOTE:Although a shoulder strap accessory is not required for use with a grass trimmer, a shoulder strap can increase operator comfor

11WARNING! Before working with a blade-equipped unit, always inspect and clear the area of objects that could interfere with or damage the blade.

ECHO Incorporated.400 Oakwood RoadLake Zurich, IL 60047-1564 U.S.A.Telephone: 1-877-986-7783Fax: 1-847-540-8416www.shindaiwa.com Yamabiko Corporation

2CAUTION!A statement preceded by the word “CAUTION” contains information that should be acted upon to prevent mechanical damage.IMPORTANT!A statement

3Safety and Operation Information Labels: Make sure all information labels are undamaged and readable. Immediately replace damaged or missing informat

4AssemblyRemoving the Existing Cutting Attachment Shield 1. Remove the four socket-head cap screws (A), bracket (B) and two shims (C). 2. Remove th

5Remove Power Head 1. Loosen drive shaft clamping bolt (A).2. Pull outer tube (B) and drive shaft out of power head (C).Remove Throttle Control Hand

6GGHFECECInstall Handlebar Mounting Bracket and Handlebar Assembly1. Remove 2 lower cap screws (A), and remove lower cap (B).2. Place the handlebar

78. Secure plastic ex tubing to outer driveshaft tube using plastic clamps (I) provided. Do not fully tighten plastic clamps until throttle cable a

8Install New Cutting Attachment ShieldGACCDABEAssemble the Cutting Attachment Shield to the Outer Tube.1. Insert the cutting attachment shield (A) be

9IMPORTANT!Discard blades that are bent, warped, cracked, broken or damaged in any way.Use a sharp blade. A dull blade is more likely to snag and thru